DTC Check / Clear

CHECK FOR DTCs
1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the intelligent tester on.
4. Read the DTCs by following the display on the intelligent tester.
  
  Fig 1: Connecting Intelligent Tester To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Refer to the intelligent tester's operator's manual for further details.
CLEAR DTCs
1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the intelligent tester on.
4. Clear the DTCs by following the display on the intelligent tester.
  
  Fig 2: Connecting Intelligent Tester To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Refer to the intelligent tester's operator's manual for further details.