Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FSE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Camshaft Timing Oil Control Valve Assembly >> Removal

Camshaft Timing Oil Control Valve Assembly: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  2. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  3. REMOVE ENGINE ROOM SIDE COVER RH (See  REMOVAL  ) 
  4. REMOVE V-BANK COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE FRONT FENDER PROTECTOR UPPER RH (See  REMOVAL  ) 
  6. REMOVE FRONT FENDER PROTECTOR UPPER LH (See  REMOVAL  ) 
  7. REMOVE ROOF DRIP SIDE FINISH MOLDING RH (See  REMOVAL  ) 
  8. REMOVE ROOF DRIP SIDE FINISH MOLDING LH (See  REMOVAL  ) 
  9. REMOVE FRONT WIPER ARM HEAD CAP (See  REMOVAL  ) 
  10. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH (See  REMOVAL  ) 
  11. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH (See  REMOVAL  ) 
  12. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See  REMOVAL  ) 
  13. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  14. REMOVE NO. 2 VENTILATION HOSE (See  REMOVAL   ) 
  15. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (See  REMOVAL   ) 
  16. REMOVE THROTTLE BODY (See  REMOVAL   ) 
  17. REMOVE INTAKE AIR SURGE TANK (See  REMOVAL  ) 
  18. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 1: Identifying Oil Control Valve Bolt
      G05285330Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side) 
    1. Remove the bolt and V-bank cover bracket.
      Fig 2: Identifying V-Bank Cover Bracket Bolt
      G05285331Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the oil control valve connector.
    3. Remove the bolt and oil control valve.
    4. Remove the O-ring from the oil control valve.
      Fig 3: Identifying Oil Control Valve Bolt
      G05285332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 4: Identifying Oil Control Valve Bolt
      G05285333Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side) 
    1. Disconnect the wiring harness to the bracket.
    2. Remove the bolt and bracket.
      Fig 5: Identifying Bracket Bolt
      G05285334Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the oil control valve connector.
    4. Remove the bolt and oil control valve.
    5. Remove the O-ring from the oil control valve.
      Fig 6: Identifying Oil Control Valve Bolt
      G05316209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals