Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle - A960E) >> Speed Sensor >> Removal

Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
      Fig 1: Identifying O-Ring From Transmission Revolution Sensor
      G05318155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
      Fig 2: Identifying O-Ring From Transmission Revolution Sensor
      G05318156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals