Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System (2GR-FSE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation) >> Integration Relay >> Installation

Integration Relay: Installation

WARNING: This page is about a different car, the 2007 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL INTEGRATION RELAY 
    Fig 1: Identifying Integration Relay
    G05316274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the 3 connectors.
    2. Attach the integration relay to the engine room No. 2 relay block.
    3. Install the No. 2 relay block cover.
  2. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  3. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
scientia non olet · About Mike's Workshop Manuals