Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Room Temperature Sensor >> Removal

Room Temperature Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See  REMOVAL  ) 
  5. REMOVE FRONT DOOR SCUFF PLATE LH (See  REMOVAL  ) 
  6. REMOVE FRONT DOOR OPENING TRIM COVER LH (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT SIDE PANEL LH (See  REMOVAL  ) 
  8. REMOVE INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY (See  REMOVAL  ) 
  9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  10. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  11. REMOVE ROOM TEMPERATURE SENSOR 
    1. Disconnect the connector and air hose.
    2. Detach the claw and remove the sensor.
    Fig 1: Locating Room Temperature Sensor Connector And Air Hose
    G05297962Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals