Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Ambient Temperature Sensor >> Removal

Ambient Temperature Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  3. REMOVE FRONT BUMPER COVER (See  REMOVAL  ) 
  4. REMOVE AMBIENT TEMPERATURE SENSOR 
    1. Disconnect the connector and detach the clamp.
    2. Remove the sensor.
    Fig 1: Identifying Ambient Temperature Sensor Clamp
    G05297966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals