Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System (2GR-FSE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection, Installation) >> Integration Relay >> Installation

Integration Relay: Installation

WARNING: This page is about a different car, the 2007 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Attach the integration relay to the engine room No. 2 relay block.
    3. Install the engine room No. 1 relay block cover.
  2. INSTALL ENGINE ROOM SIDE COVER LH (  INSTALLATION  ) 
  3. INSTALL COOL AIR INTAKE DUCT SEAL (  INSTALLATION  ) 
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About Mike's Workshop Manuals