Inspection Procedure

1. Disconnect the connector from the A/C control assembly.
   Fig 1: Identifying A/C Control Assembly Connector Terminal

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector from the A/C amplifier.
3. Measure the resistance according to the value (s) in the table below.

   Standard resistance 

   A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER RESISTANCE
   
   

   Tester Connection (Symbols)	Condition	Specified Condition
   E1-37 (LIN1) - E3-15 (TX1)	Always	Below 1 Ω
   E1-37 (LIN1) - Body ground	Always	10 kΩ or higher

Fig 2: Identifying A/C Amplifier Connector Terminal

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE