Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Supplemental Restraint System - Diagnostics) >> Check Mode Procedure

Check Mode Procedure

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. SIGNAL CHECK (CHECK MODE) 

    (USING A HAND-HELD TESTER) 

    1. Connect the hand-held tester to the DLC3.
      2. Fig 1: Connecting Hand-Held Tester To DLC3
      G04336094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the ignition switch to the ON position.
    3. Select the "SIGNAL CHECK", and proceed checking with the hand-held tester.
scientia non olet · About Mike's Workshop Manuals