Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Navigation System - Diagnostics) >> Cursor Or Map Rotates When Vehicle Stopped >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDITION 
    1. Check with the customer if the vehicle has been turned by a turntable.

      OK: 

      Vehicle has not been turned by a turntable. 

    HINT:

    If the vehicle is rotated on a turntable with the ignition switch on, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.

    Fig 1: Identifying Rotates Vehicle Stopped
    G04337871Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    NG: TURN IGNITION SWITCH TO ON POSITION WHEN VEHICLE IS COMPLETELY STOPPED 

    OK: RETURN TO THE ORIGINAL INSPECTION BECAUSE THE CHECK RESULT IS NORMAL