Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CD
1. Check the CD.
  OK:
  
  The CD is clean.
  
  HINT:
  
  If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
  
  NOTE: Do not use a conventional record cleaner or anti-static preservative.
  
  Fig 1: Cleaning Disc Surface
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: CLEAN CD

OK: GO TO NEXT STEP.
CHECK CD
1. Check that the CD is not deformed or cracked.
  OK:
  
  No deformations or cracks on the CD.
  
  Fig 2: Ensure Disc Is Not Deformed Or Cracked
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: CD IS FAULTY

OK: GO TO NEXT STEP.
CHECK OPERATION ANOTHER CD
1. Check using another CD.
  1. Check if the problem recurs using another CD.
    OK:
    
    The problem does not occur.
OK: CD IS FAULTY

NG: GO TO NEXT STEP.
CHECK RADIO AND NAVIGATION ASSEMBLY
1. Check the radio and navigation assembly installation condition.
  1. Check that the radio and navigation assembly is properly installed.
    OK:
    
    Radio receiver is properly installed.
NG: REINSTALL RADIO AND NAVIGATION ASSEMBLY

OK: REPLACE RADIO AND NAVIGATION ASSEMBLY