Typical Enabling Conditions
The following conditions are common to all conditions below: ON malfunction (A) and (B)
RESULT CHART
| The monitor will run whenever the following DTCs are not present. | None |
| Output speed sensor circuit | Not circuit malfunction |
| Vehicle speed sensor "A" circuit | Not circuit malfunction |
| Transfer neutral position switch | OFF |
ON malfunction (A)
ITEM CHART
| Output speed (Transfer output speed) | 1,000 to 3,000 rpm |
ON malfunction (B)
ITEM DIAGNOSTIC NOTE CHART
| Output speed (Transfer output speed) | 143 rpm or more |