Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2006 >> LX 470 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2UZ-FE) - System And CIRUIT Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE NO. 1 ENGINE UNDER COVER ( REMOVAL  ) 
  3. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
    Fig 1: Identifying Crankshaft Position Sensor
    G04061654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals