Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2006 >> LX 470 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2UZ-FE) - System And CIRUIT Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 6.5 N*m (66 kgf*cm, 57 in.*lbf) 

    2. Connect the sensor connector.
  2. INSTALL NO. 1 ENGINE UNDER COVER ( INSTALLATION  ) 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. PERFORM INITIALIZATION 
    1. Perform initialization (INITIALIZATION ).
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
    Fig 1: Identifying Engine Under Cover
    G04061656Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals