Cruise Main Indicator Light Circuit: Description

When the cruise control main switch is turned ON, the CRUISE main indicator light lights up.

1. PERFORM ACTIVE TEST BY INTELLIGENT TESTER 
   1. Connect the intelligent tester (with CAN VIM) to the DLC3.
   2. Check the cruise indicator of the combination meter using the ACTIVE TEST.
   ACTIVE TEST REFERENCE CHART
   
   

   Description	Tester Display	Check Condition
   CRUISE indicator light	CRUISE INDIC	ON / OFF

   OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE 

   NG: REPLACE COMBINATION METER ASSEMBLY