DTC C1298/98 Linear Solenoid Circuit: Description

The 4WD control ECU receives signals from each sensor to control clutch fluid pressure to limit the center differential operation, distributing torque according to the driving conditions.

DTC C1298/98 TROUBLE DETECTION REFERENCE

DTC No.	DTC Detecting Condition	Trouble Area
C1298/98	1. When all of the following are detected: IG1 terminal voltage is 9.5 V or more Operation command current for the linear solenoid (transfer control solenoid) is 3.5 A or more. Open or short in the SLC+ or SLC- circuit continues for 1 second or more.	Transfer transmission wire Wire harness Transfer control solenoid assembly 4WD control ECU