Transmitter Sub-ASSY Module Set Door Control: Replacement

HINT:

The installation is in the reverse order of the removal.

1. REMOVE TRANSMITTER SUB-ASSY MODULE SET DOOR CONTROL 
   NOTE: Special caution should be taken for handling each component as they are precise electronic components.
   1. Using a screwdriver, remove the screw.
   2. Push the cover with your finger to make a gap as shown in Fig 1, then pry out the cover using that gap.
      NOTE: Do not forcibly pry the cover up.
      Fig 1: Removing Transmitter Sub-Assy Module Set Door Control

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002