Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2005 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 296 (Suspension Control System) >> Suspension Control Ecu >> Replacement

Suspension Control Ecu: Replacement

WARNING: This page is about a different car, the 2004 Lexus RX 330. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE RH (See  REPLACEMENT  ) 
  2. REMOVE COWL SIDE TRIM SUB-ASSY RH (See  OVERHAUL  ) 
  3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2 (See  OVERHAUL  ) 
  4. REMOVE GLOVE COMPARTMENT DOOR ASSY (See  OVERHAUL  ) 
  5. REMOVE ECM (See  REPLACEMENT  ) 
  6. REMOVE AIR CONDITIONER AMPLIFIER ASSY (See  REPLACEMENT  ) 
  7. REMOVE SUSPENSION CONTROL ECU 
    1. Disconnect the suspension control ECU connector.
    2. Remove the 2 bolts and the suspension control ECU from the bracket.
      Fig 1: Removing Suspension Control ECU
      G00885208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL SUSPENSION CONTROL ECU 
    1. Install the suspension control ECU with the 2 bolts onto the bracket.
      Fig 2: Installing Suspension Control ECU
      G00885209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf) 

    2. Connect the suspension control ECU connector.
  9. INSTALL AIR CONDITIONER AMPLIFIER ASSY (See  REPLACEMENT  ) 
  10. INSTALL ECM (See  REPLACEMENT  ) 
  11. INSTALL GLOVE COMPARTMENT DOOR ASSY 
  12. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2 
  13. INSTALL COWL SIDE TRIM SUB-ASSY RH 
  14. INSTALL FRONT DOOR SCUFF PLATE RH 
scientia non olet · About Mike's Workshop Manuals