Network Gateway Ecu: Replacement

HINT:

COMPONENTS: See INSTRUMENT PANEL/METER

1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 2 (See step 27 in  REPLACEMENT  ) 
2. REMOVE GLOVE COMPARTMENT DOOR ASSY (See step 28 in  REPLACEMENT  ) 
3. REMOVE NETWORK GATEWAY ECU 
   1. Disconnect the connector.
   2. Remove the screw and the network gateway ECU.
   Fig 1: Removing Network Gateway ECU
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002