Inspection Procedure
- CHECK WIRE HARNESS AND CONNECTOR (ECM - SKID CONTROL ECU)
- Check for an open or short circuit in harness and connector between the ECM and the skid control ECU (See ELECTRONIC CIRCUIT INSPECTION PROCEDURE ).
- NG: REPAIR OR REPLACE WIRE HARNESS OR CONNECTOR
- OK: Go to next step
- REPLACE ABS & TRACTION ACTUATOR ASSY (SKID CONTROL ECU)
(See
REPLACEMENT
)
HINT:
If the problem still occurs after the replacement, replace the ECM.
When a malfunction is detected in the skid control ECU, replace the ABS & traction actuator assy.
- REPLACE ECM (See REPLACEMENT )