Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2005 >> IS 300 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Body Control System - Diagnostics >> Circuit Inspection >> Door Lock Motor Circuit >> Inspection Procedure

Inspection Procedure

  1. Check door lock motor (See  INSPECTION  ). 

    NG: Replace the door lock motor. 

    OK: Go to next step 

  2. Check wire harness and connector between door lock motor and body ECU. 

    NG: Repair or replace wire harness or connector. 

    OK: Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 

scientia non olet · About Mike's Workshop Manuals