Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation) >> Mass Air Flow Meter >> Installation

Mass Air Flow Meter: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
    2. Connect the mass air flow meter connector.
      Fig 1: Locating Mass Air Flow Meter Screws
      G04973840Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals