Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT COMBINATION METER ASSY
NG: REPAIR OR REPLACE COMBINATION METER ASSY
OK: Go To Next Step
- CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSY - ECM)
- Check for open and short circuit in harness and connector between combination meter assy and ECM (See ELECTRONIC CIRCUIT INSPECTION PROCEDURE ).
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )