Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2003 >> LS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Anti-Lock Brake System) >> Removal & Installation >> Wheel Speed Sensor (Front) >> Installation

Wheel Speed Sensor (Front): Installation

WARNING: This page is about a different car, the 2004 Lexus SC 430, 2003 Lexus SC 430, and 2002 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten speed sensor bolt to specification. See TORQUE SPECIFICATIONS .
  2. Install the sensor harness with the 2 clamp bolts and resin clip to the body and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Connect the speed sensor connector.
  4. Install the front fender liner and front wheel and tighten lug nuts to specification. See TORQUE SPECIFICATIONS .
  5. Install the ornament with the 10 bolts and tighten to specification. See TORQUE SPECIFICATIONS .
  6. Check speed sensor signal. See SYSTEM TESTING .
scientia non olet · About Mike's Workshop Manuals