Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2003 >> GS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 422 (LEXUS Navigation System - Diagnostics) >> Circuit Inspection >> 7. Navigation screen not stabilized (Synchronous error). >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2005 Lexus GS 430 and 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the navigation ECU. 

    CHECK: 

    Check terminals +B. OK:

    +B: 10 - 14 V 

    CHECK: 

    Check terminal ACC when turn ignition switch ACC or ON position.

    OK: 

    ACC: 10 - 14 V 

    CHECK: 

    Check terminal SYNC, VR or VG.

    OK: 

    SYNC, VR, VG: See " NAVIGATION ECU  " of "TERMINAL OF ECU" 

    1. NG: Replace the wire harness when all terminals are faulty. Replace the wire harness when the SYNC terminal is faulty. 
    2. OK: Replace the multi display.