Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2000 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - Service & Adjustment Specifications) >> Fuel Systems >> Throttle Position Sensor >> Throttle Position Sensor Resistance Specifications (MR2)

Throttle Position Sensor Resistance Specifications (MR2)

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2001 Toyota Tundra, 2001 Toyota Tacoma, 2001 Toyota Sienna, 2001 Toyota Sequoia, and 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)

Application Throttle Position Terminals Ohms
1.8L 4-Cyl.
2000 Models Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
2001Models (1)
With Standard Type Manual Transaxle Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
Models With Sequential Manual Transaxle .... VC & E2 (2) 1200-3200
(1) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward and uses a special fluid in the fluid reservoir. The sequential manual transaxle may be identified by the shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used.
(2) Resistance at 68°F (20°C).
scientia non olet · About Mike's Workshop Manuals