Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2000 >> ES 300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0116: Engine Coolant Temperature (ECT) Sensor Circuit Range/Performance Fault >> Circuit Description

Circuit Description

The ECT sensor is a thermistor that monitors coolant temperature. If DTC P0116 is set, ECM will operate in a fail-safe mode, in which engine coolant is assumed to be 176°F (80°C). DTC P0116 is set when after engine has been running for 20 minutes ECM detects a temperature of less than 19.4°F (-7°C) on THW circuit, and actual engine coolant temperature is 95°F (35°C). DTC P0116 is also set when after engine has been running for 5 minutes ECM detects a temperature of less than 50°F (10°C), or detects a temperature equal to or greater than 19.4°F (-7°C) on THW circuit, and actual engine coolant temperature is 95°F (35°C). DTC P0116 is set when after engine has been running for 2 minutes ECM detects a temperature of more than or equal to 50°F (10°C) on THW circuit, and actual engine coolant temperature is 95°F (35°C). Possible causes are:

NOTE: If DTCs P0115 and P0116 are output together, diagnose DTC P0115 first. Inspect engine coolant temperature circuit for an open. Repair as necessary. See appropriate wiring diagram in WIRING DIAGRAMS article.