Circuit Description

The EGR system recirculates exhaust gas through intake system to reduce combustion temperature and NOx emissions. The amount of EGR valve opening is controlled by a stepper motor located inside of EGR valve. The ECM operates the stepper motor in response to engine operating conditions.

The EGR valve is closed under the following conditions:

• Coolant temperature below 129°F (54°C).
• Vehicle under deceleration.
• Light engine load.
• Engine speed more than 4000 RPM.
• Engine idling.
• Park/neutral position switch on.

DTC is set if there is an open or short in EGR stepper motor circuit. Possible causes are:

• Open or short in EGR stepper motor circuit.
• EGR valve.
• ECM.