Diagnostic Trouble Code Index DTC: Driver ASSTANCE Domain Controller (DADC) -- Range Rover Velar/L560

• General Information
  • Description And Operation
    • Diagnostic Trouble Code Index - DTC: Driver Assistance Domain Controller (DADC) (G2730800)
      • Driver Assistance Domain Controller (DADC)
      • C1A67-82: Forward Looking Sensor - Alive/Sequence counter incorrect/not updated
        • Possible Causes
        • Action
      • C1A67-83: Forward Looking Sensor - Value of signal protection calculation incorrect
        • Possible Causes
        • Action
      • C1A67-86: Forward Looking Sensor - Signal invalid
        • Possible Causes
        • Action
      • C1A67-93: Forward Looking Sensor - No operation
        • Possible Causes
        • Action
      • U0046-88: Vehicle Communication Bus C - Bus off
        • Possible Causes
        • Action
      • U0080-88: Vehicle Communication Bus F - Bus off
        • Possible Causes
        • Action
      • U0400-81: Invalid Data Received - Invalid serial data received
        • Possible Causes
        • Action
      • U0400-82: Invalid Data Received - Alive/Sequence counter incorrect/not updated
        • Possible Causes
        • Action
      • U0400-83: Invalid Data Received - Value of signal protection calculation incorrect
        • Possible Causes
        • Action
      • U0400-86: Invalid Data Received - Signal invalid
        • Possible Causes
        • Action
      • U0400-87: Invalid Data Received - Missing message
        • Possible Causes
        • Action
      • U201A-56: Control Module Main Calibration Data - Invalid/Incompatible configuration
        • Possible Causes
        • Action
      • U202B-93: Ethernet Link to Gateway Module - No operation
        • Possible Causes
        • Action
      • U2036-57: Driver Assistance Domain Controller - Invalid/Incompatible software component
        • Possible Causes
        • Action
      • U2300-51: Central Configuration - Not programed
        • Possible Causes
        • Action
      • U2300-54: Central Configuration - Missing calibration
        • Possible Causes
        • Action
      • U2300-55: Central Configuration - Not configured
        • Possible Causes
        • Action
      • U2300-56: Central Configuration - Invalid/incomplete configuration
        • Possible Causes
        • Action
      • U3000-47: Control Module - Watchdog/Safety microC failure
        • Possible Causes
        • Action
      • U3000-49: Control Module - Internal electronic failure
        • Possible Causes
        • Action
      • U3000-98: Control Module - Component or system over temperature
        • Possible Causes
        • Action