DTC B1DB6-46: Rear Roof Blind Module - Calibration/parameter memory failure: Action
NOTE:
To validate the repair firstly run the engine for 30 seconds and check the rear roof blind function, then use the Jaguar Land Rover approved diagnostic equipment to check this DTC is no longer set within the body control module
- Using the Jaguar Land Rover approved diagnostic equipment, perform the routine - Calibrate Rear Roof Blind (2207). Clear the Diagnostic Trouble Code(s) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new rear roof blind motor