Anti-Lock Brake System Control Module - Left Hand Drive (G2386006): Installation

- Install the ABS module to the mounting bracket.
- Torque : 27Nm
- Install the ABS module.
- Install and tighten the 3 bolts.
- Torque : 10Nm
Connect the ABS module electrical connector.
- Connect the 4 brake lines.
- Secure the 4 brake lines.
- Torque : 17Nm
NOTE: If equipped.

Connect the supply line.

Torque : 17Nm
- Connect the 2 brake lines.
- Torque : 17Nm
- Secure the 2 brake lines.
Install the coolant expansion tank.
Refer to: the appropriate service information
Install the air cleaner.
Refer to: LEFT AIR CLEANER .

Refer to: LEFT AIR CLEANER .

Refer to: LEFT AIR CLEANER .

Refer to the appropriate service information

Refer to: AIR CLEANER .

Refer to: AIR CLEANER .
Install the engine cover.
Refer to: ENGINE COVER - TDV6 3.0L DIESEL .

Refer to: ENGINE COVER - TDV8 4.4L DIESEL .

Refer to: ENGINE COVER - V8 S/C 5.0L PETROL .

Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .

Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .
Bleed the brake system.
Refer to: BRAKE SYSTEM BLEEDING FIXED CALIPER - VEHICLES WITH: NON-ELECTRIC VEHICLES .

Refer to: BRAKE SYSTEM BLEEDING FLOATING CALIPER - VEHICLES WITH: NON-ELECTRIC VEHICLES .

Refer to: BRAKE SYSTEM BLEED WITH DIAGNOSTIC EQUIPMENT - VEHICLES WITH: PHEV .