Ride And Handling Optimization (G1580423): Specifications
LUBRICANTS, FLUIDS, SEALERS AND ADHESIVES SPECIFICATION
| |
SPECIFICATIONS |
| Dynamic Response Fluid |
Texaco Cold Climate Fluid 33270 |
CAPACITIES SPECIFICATION
| |
LITERS |
| Capacity |
2.7 Litres (4.75 pints) (2.85 US quarts) |
GENERAL SPECIFICATION
| |
|
| System pressure |
Variable between 3-180 bar dependant on lateral acceleration |
TORQUE SPECIFICATIONS
| ITEM |
NM |
LB-FT |
| Dynamic Response actuator bleed screw |
15 |
11 |
| Dynamic Response Hydraulic Pump |
|
|
| M10 bolts |
48 |
35 |
| M8 bolts |
25 |
18 |
| Dynamic Response Hydraulic Pump Pressure High Hose |
10 |
7 |
| Front actuator pipes to valve block nuts |
22 |
16 |
| Rear actuator pipes to valve block nuts |
22 |
16 |
| Valve block mounting bolts |
9 |
7 |
| Valve block mounting stud |
16 |
12 |
| Dynamic Response fluid pipe securing bracket nuts/bolts |
10 |
7 |
| Fluid lines to actuator banjo bolts |
22 |
16 |
| Fluid lines to cooler bolts |
9 |
7 |
| Stabilizer bar link nut |
185 |
136 |
| Front stabilizer bar to body clamp bolts |
110 |
81 |
| Rear stabilizer bar to subframe clamp nuts and bolt |
110 |
81 |
| Dynamic Response module |
10 |
75 |
| Upper Accelerometer |
7 |
5 |
| Lower Accelerometer |
7 |
5 |
| Front dynamic stabilizer bar support bracket to subframe bolts |
|
|
| M12 bolts |
|
|
| Stage 1 |
90 |
66 |
| Stage 2 |
Then a further 180 degrees |
Then a further 180 degrees |
| M14 bolts |
|
|
| Stage 1 |
140 |
103 |
| Stage 2 |
Then a further 120 degrees |
Then a further 120 degrees |