Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2015 >> LR4 HSE, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Lock Control - Traction Control) >> Anti-Lock Control - Traction Control >> Description & Operation >> Anti-Lock Control - Traction Control >> HDC Relay

HDC Relay

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.

The HDC relay is used to illuminate the stoplamps when the brakes are activated during HDC operation and during dynamic application of the parking brake.

The HDC relay is a non-serviceable, solid state relay on the circuit board of the central junction box (CJB). Operation of the HDC relay is controlled by the anti-lock brake system (ABS) module switching the coil to ground. The anti-lock brake system (ABS) module monitors brake system hydraulic pressure and energizes the HDC relay during active braking. A pressure threshold and time filter prevent the stoplamps from flickering when HDC is braking.

scientia non olet · About Mike's Workshop Manuals