DTC C2008-19: Left Motor - Circuit current above threshold: Action
NOTE:
To validate an electric park brake repair, apply and release the electric park brake switch
- Check for frozen actuators due to low ambient temperatures. Move the vehicle to a warmer environment and allow the actuators to thaw. Clear the DTC and retest
- Refer to the appropriate SYSTEM WIRING DIAGRAMS and check the electric park brake left actuator circuits for short circuit to ground, short circuit to power. Repair circuit(s) as required
- Using the Jaguar Land Rover Approved Diagnostic Equipment, check for anti-lock brake system related DTCs and perform the relevant corrective actions
- Clear DTCs. Apply the park brake and retest
- If the fault persists, cycle ignition and clear DTCs. Temporarily connect the right-side actuator harness to the left actuator and vice versa, then apply and release the park brake. If DTC C2007-19 is set, replace the electric park brake left actuator. If DTC C2008-19 is set, check the electric park brake left actuator power circuit for short circuit faults and repair circuits as required. Reconnect actuator harnesses in original positions, clear DTCs and retest