Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Audio Unit) >> Audio Unit >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2010 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the amplifier.
    • Install the bolts and tighten to 10 Nm (7 lb.ft).
    • Connect and secure the electrical connectors.
  2. Install the front seat. Refer to Front Seat .
  3. Connect the battery ground cable. Refer to Specifications .
  4. Using the Land Rover approved diagnostic equipment, follow the on-screen instructions and configure the audio unit amplifier.
scientia non olet · About Mike's Workshop Manuals