Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Passenger Air Bag Module >> Installation

Passenger Air Bag Module: Installation

WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the passenger air bag module bracket.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  2. Install the passenger air bag module.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  3. Install the instrument panel upper section. Refer to Instrument Panel Upper Section .
  4. Connect the battery ground cable. Refer to Specifications .
scientia non olet · About Mike's Workshop Manuals