Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Front Impact Severity Sensor >> Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front impact severity sensor.
    • Tighten the Torx bolts to 8 Nm (6 lb.ft).
    • Connect the electrical connector.
  2. Install the headlamp assembly. Refer to Headlamp Assembly .
scientia non olet · About Mike's Workshop Manuals