Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Anti-Lock Control -- LR2/L359) >> Anti-Lock Control >> Anti-Lock Control (Diagnosis And Testing) >> Diagnosis And Testing >> Inspection And Verification >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
MECHANICAL ELECTRICAL
  • Brake fluid level
  • Vacuum system
  • Wheel speed sensor installation
  • Wheel speed sensor air gap
  • Steering wheel rotation sensor
  • Accelerometer/sensor cluster installation
  • Incorrect wheel or tire size
  • Warning light operation
  • Fuses
  • Wheel speed sensors
  • Connectors/Pins
  • Harnesses
  • Steering wheel rotation sensor
  • Accelerometer/sensor cluster
  • Hydraulic Control Unit (HCU)
  1. 3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
  2. 4. If the cause is not visually evident, check the anti-lock braking system and steering rotation sensor modules for Diagnostic Trouble Codes (DTCs) and refer to the relevant DTC Index.