Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Anti-Lock Control -- LR2/L359) >> Anti-Lock Control >> Anti-Lock Control (Diagnosis And Testing) >> Diagnosis And Testing >> Inspection And Verification >> Notes

Inspection And Verification: Notes

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.
NOTE: Prior to any testing or inspection, the vehicle should be check for any relevant warning lamps being illuminated. If a warning lamp is illuminated, check for DTCs and refer to the relevant DTC Index. If no warning lamp is illuminated, continue with diagnostic procedures below.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of damage and system integrity.