Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 383 (Pedestrian Protection System -- XF/X250) >> Pedestrian Protection System >> Description And Operation >> Pedestrian Protection System - System Operation And Component Description (G1584168) >> Failure Mode Detection

Failure Mode Detection

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

In service, if any fault is detected, or any part of the system is recognized as not being present, the message center displays the warning 'Check Pedestrian System'.

The bonnet deployment actuators are non-serviceable components, and if they must be replaced due to a fault, or due to having been deployed, or following any other accident, their barcode labels must be read and recorded in the service database against the vehicle VIN for security purposes.

After deployment of the pedestrian protection system, the vehicle must be stopped as soon as it is safe to do so. The hazard warning lamps will be activated and can only be switched off by pressing the engine START/STOP button to turn the engine off and on again. A warning message 'CHECK PEDESTRIAN SYSTEM' will appear on the message center and the vehicle should be transported to the nearest dealer/authorised repairer. The vehicle must not be driven when the bonnet has been deployed.

NOTE: If the warning message 'CHECK PEDESTRIAN SYSTEM' appears in the message center when the bonnet has not been deployed, the vehicle should be taken to the nearest dealer/authorised repairer immediately. It can be driven.

If any significant damage occurs to the front bumper it should be inspected by a dealer/authorised repairer as soon as possible.