Air Suspension Control Module: Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air suspension control module.
- Secure with the clips.
- Connect the electrical connectors.
- Tighten the bolt to 9 Nm (7 lb.ft).
- Install the closing trim panel.
- Connect the electrical connector.
- Secure the clip.
- Tighten the screws.
- Install the cowl side trim panel. Refer to Cowl Side Trim Panel article.
- Initiate a new control module using T4.