Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Ride And Handling Optimization) >> Ride And Handling Optimization >> Removal & Installation >> Ride And Handling Optimization Switch >> Removal

Ride And Handling Optimization Switch: Removal

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 
NOTE: Make sure that the gear selector lever is in position N before removing any components.
  1. See figure
    GJ0018950
  2. See figure
    GJ0018964
  3. See figure
    GJ0018965
  4. See figure
    GJ0018951
  5. See figure
    GJ0018952
  6. See figure
    GJ0018973
  7. See figure
    GJ0018971
  8. See figure
    GJ0018974
scientia non olet · About Mike's Workshop Manuals