Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition >> Engine Ignition (I6 3.2L Petrol) >> Removal And Installation >> Ignition Coil-On-Plug >> Removal

Ignition Coil-On-Plug: Removal

    CAUTION: After switching of the ignition, wait for 2 minutes before disconnecting the battery. Failure to wait for 2 minutes will damage the navigation computer.
  1. Disconnect the battery ground cable. Refer to SPECIFICATIONS .
  2. Remove the engine cover. Refer to ENGINE COVER .
  3. Disconnect the 6 ignition coil-on-plugs.
    GJ0020887
  4. See figure
    GJ0020888
scientia non olet · About Mike's Workshop Manuals