Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Speed Control (I6 3.2L Petrol) >> Removal And Installation >> Speed Control Switch >> Removal

Speed Control Switch: Removal

  1. Disconnect the battery ground cable. Refer to SPECIFICATIONS .
  2. Make the SRS system safe.

    Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING (Safety Belt System).

    Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING (Supplemental Restraint System).

  3. Remove the driver air bag module. Refer to DRIVER AIR BAG MODULE .
    • Remove the 2 Torx screws.
    • Disconnect the electrical connector.
    GJ0021111
scientia non olet · About Mike's Workshop Manuals