Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2011 >> LR2 Base >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 91 (Video System) >> Video System >> Diagnostic Procedures >> Video System >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle.
NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION

    Mechanical Electrical
    • Front touch screen display (TSD) installation and condition
    • Rear seat entertainment (RSE) screen installation and condition
    • Digital versatile disc (DVD) multi-changer installation and condition
    • Television antennae (two in each rear side window)
    • Fuses
    • Electrical harnesses
    • Fibre optic cable harnesses
    • Infotainment relay
    • Display screens
    • DVD multi-changer
    • Television tuner module
    • RSE module
    • Television antenna amplifiers (4)
    • Remote control and batteries
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the relevant DTC Index.