Automatic Transmission/Transaxle External Controls (4.2L): Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Type | Cable operated from shift mechanism to bell crank on side of transmission with manual release from Park 'P' position in the event of electrical failure |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Selector lever locknut | 14 | 10 |
| Transmission heat shield bolts | 10 | 7 |
| Transmission under shield bolts | 10 | 7 |
| Transmission selector nuts* | 8 | 6 |
*Before VIN257100, discard old fixings and tighten new fixings to the torque value given