Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2007 >> Range Rover HSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission/Transaxle External Controls (4.2L)) >> Automatic Transmission/Transaxle External Controls (4.2L) >> Description & Operation >> External Controls >> Introduction >> Selector Lever Position Switch

Selector Lever Position Switch

WARNING: This page is about a different variant/trim than selected.

The selector lever position switch is located on the right hand side of the selector lever assembly. The switch has a moving contact which is connected to the selector lever. As the lever is moved, the sliding contact moves in the switch completing a circuit with four further contacts in the switch which represent the four lever positions; P, R, N and D. The switch is connected to the selector position light emitting diode (LED) display via a ribbon cable and provides the power for the display light emitting diode (LED)'s. The switch receives its power supply from the generic electronic module (GEM).

scientia non olet · About Mike's Workshop Manuals