Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2007 >> Range Rover HSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission/Transaxle External Controls (4.2L)) >> Automatic Transmission/Transaxle External Controls (4.2L) >> Description & Operation >> External Controls >> Introduction >> Selector Cable

Selector Cable

WARNING: This page is about a different variant/trim than selected.

The selector cable is a Bowden type cable that connects the selector lever to the manual selector spool valve. A 'C' clip secures the outer cable to the selector lever assembly. The inner cable is secured to an arm which is connected to the selector lever via a 'U' shaped bracket and pin.

The transmission end of the outer cable is secured to a bracket on the transmission by a clamp nut. The transmission has an operating lever which is attached to and operates the manual selector control spool valve. The inner cable is attached to the operating lever by a clamp bush and locknut. The clamp bush allows for the adjustment of the selector cable.

scientia non olet · About Mike's Workshop Manuals