Starting System (4.2L): Specifications
WARNING: This page is about a different variant/trim than selected.
STARTER MOTOR
| Item | Specification |
|---|---|
| Starter motor: | |
| Make | Denso |
| Type | RA - Pre-engaged |
| Voltage | 12 |
| Current consumption | 1.8 kW |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| * B+ terminal nut | 10 | 7 |
| Starter motor bolts | 45 | 33 |
| Starter motor heat shield bolts | 45 | 33 |
CAUTION:
* Damage to the internal connections will occur if this torque is exceeded