Sleep Mode
To conserve power, the entire generic electronic module (GEM) goes into a 'sleep' mode 16 minutes after signal activity ceases and the ignition is switched off. The typical current consumption of the generic electronic module (GEM) in sleep mode is 1.25 mA. In the sleep mode the generic electronic module (GEM) is in a limited operational mode from which it can be awakened by certain relevant wake-up signals. After being awakened, the generic electronic module (GEM) remains awake for 1 minute if no action is triggered. If an action is triggered, the generic electronic module (GEM) remains awake for at least 16 minutes.
The generic electronic module (GEM) wakes up when it receives a signal from any of the following:
- The K bus
- Any door status switch (driver, front passenger, left-hand (LH) and right-hand (RH) rear doors)
- Hood ajar switch
- Central locking switch
- Driver's door lock cylinder lock switch
- Driver's door lock cylinder unlock switch
- Interior lamp switch
- Lower tailgate opening switch
- Tilt alarm sensor
- Ultrasonic sensor
- Upper tailgate opening switch
- Upper tailgate status switch.